Ring stiffness is used to indicate the external pressure resistance of buried PPR hot water insulation pipe. If the ring stiffness of PPR hot water insulation pipe is too small, the pipe may be seriously deformed or destroyed by buckling. If the ring stiffness is too high, too large section moment of inertia will be adopted, which will lead to too many materials and increase the cost.

PPR熱水保溫管接受的負載有內部壓力和外部壓力，通常內部壓力產生的應力是形成PPR熱水保溫管毀壞的主要緣由，毀壞方式是管壁內的拉應力形成變形過大和決裂，設計的時分，要先按接受內壓負載停止計算，選擇資料和構造數據，然后再思索外壓負載停止設計驗算，必要時要修正構造數據。

The load that PPR hot water insulation pipe receives includes internal pressure and external pressure. Usually the stress produced by internal pressure is the main reason for the damage of PPR hot water insulation pipe. The damage mode is that the tensile stress in the pipe wall causes excessive deformation and fracture. When designing, the calculation should be stopped according to the load received by internal pressure, the data of selection and construction should be selected, and then the design test of the load stopped under external pressure should be considered. Calculate, revise the construction data when necessary.

PPR熱水保溫管接受外壓負載，毀壞方式是外壓負載形成管材變形過大或壓屈失穩，設計時要依照外壓負載停止計算，來選擇資料和構造數據。

PPR hot water insulation pipe receives external pressure load. The damage mode is that the external pressure load causes excessive deformation or buckling instability of the pipe. The design should stop calculating according to the external pressure load to select data and structural data.

外壓負載比擬復雜，包括土壤重量和空中產生的靜負載，及運輸車輛經過時產生的動負載，PPR熱水保溫管接受負載的機理也是比擬復雜的，由于PPR熱水保溫管屬于柔性管材，在外壓負載作用下，管材和四周的土壤會產生“管土共同作用”，也就是說管材和四周土壤來共同接受外壓負載。

External pressure load comparison is complex, including soil weight and static load generated in the air, and dynamic load generated by transportation vehicles. The mechanism of PPR hot water insulation pipe receiving load is also complex. Because PPR hot water insulation pipe belongs to flexible pipe, under the external pressure load, pipe material and surrounding soil will produce "pipe-soil interaction", that is, pipe material and surrounding soil. To jointly accept external pressure load.

PPR熱水保溫管的環剛度實踐上是不斷不變的，比方de110*0.8Mpa和de315*0.8Mpa的PPR熱水保溫管，同樣重量壓力的管道，但環剛度并不是相同的，管材的口徑越大，環剛度就會相對削弱，還有氣溫變化的影響，溫度降落，PPR熱水保溫管的硬度也會增大，環剛度就會變大。

In practice, the ring stiffness of PPR hot water insulation pipes is constant. For example, de110*0.8Mpa and de315*0.8Mpa hot water insulation pipes, the same weight pressure pipes, but the ring stiffness is not the same. The bigger the diameter of pipes, the weaker the ring stiffness will be. There is also the influence of temperature changes. When the temperature falls, the hardness of PPR hot water insulation pipes will increase, and the ring stiffness will increase.

關于PPR熱水保溫管性能的理解，能夠協助人們更好的運用PPR熱水保溫管，使之發揮更大的價值，而PPR熱水保溫管廠家在設計和消費時，也會思索PPR熱水保溫管的環剛度問題，保證管材性能的穩定。

Understanding the performance of PPR hot water insulation pipe can help people better use PPR hot water insulation pipe and make it play a greater value. When designing and consuming PPR hot water insulation pipe manufacturers will also consider the ring stiffness of PPR hot water insulation pipe to ensure the stability of pipe performance.